Shenzhen Topgreen Industrial Co., Ltd.

Promotion for pre-order X5 mini 60W Box Mod

From: Topgreen
publisher: jerry
Time: 2015-06-10
Summary: Pre-order before June.1st,we will give you eGo case as gift for each box mod. At the same time, we also provide the best wholesale price.

XVAPE-X5 Mini TC mod 60w

Topgreen Original X5 mini TC mod 60w is one of Topgreen 1st batch box mod, we had spent 

about half one year time to design and improve,we can proudly say that we are ready now.

In order to hit market,Pre-order before June.1st,we will give you  eGo case as gift for each box mod

At the same time, we also provide the best wholesale price.

Wholesale price:

20-50: USD32.0
50-100: USD31.0
100 -500: USD30.0
500-1,000: USD29.0
1,000-3,000: USD28.0
above 3,000: USD27.0


Pls contact jerry"@"topgreencig.com


Parameter 
1. Size
 Material Aluminum
 Electrode Copper plated Silver electrode
 Color Black/Silver
 Size 85*38*25mm
 POWER 5-60w
 VOLTAGE 11v
 Atomizer's resistance 0.2-3.0 Ohm(nornmal atomizer)
 0.1-1.0 Ohm(nickel 200 coil)
 Temperature regulation Fahrenheit degree: 200F-600F
 Centigrade degree: 100C-300C
 Advantage Temperature control mod TC box mod
 Battery Use 1pcs 18650 battery
 G.W/N.W 166 g/121 g
 Thread 510 Thread
 BatteryICR18650,>20A
Kits content
xvape-x5 Mini TC Device Only1pc
Manual1pc
Gift Box1pc


  Basic Function:

1.Three buttons: one smoke button, two watt adjustable buttons.
2.Power on reset, OLED display: "HELLO";Power off,OLED display "System off"
3.No load:OLED will show "NO ATOMIZER"
4.Loading:OLED will show Resistance,current output watt,voltage,current setting temp  and 
working mode
5.Screen invertaion: In Starting state,press 3 times smoke button in 2seconds go into menu 
state and press "+/-" to choose “SCREEN MODE”
6.Power locked: press the smoke button and the "-"button at the same time and last  5seconds,
OLED show“POWER LOCKED"
7.Power Mod:In Starting state,press 3 times smoke button in 2seconds go into menu state and press "+/-" to choose “POWER MODE”
8.ohm meter: press the "+" and "-" button at the same time and last 3seconds
9.Temperature display switch:In Starting state,press 3 times smoke button in 2seconds go into menu state and press "+/-" to choose “TC MODE”
10.Temperature control design:When current temp up to setting temp, box mod will auto to reduce the output Amp and maintain current temperature

11.No Liquid: OLED will show "No Liquid" if atomizer has no liquid


  Protection:  
1.Over puffing protection: when vaping over 10 seconds, the power will be off compulsively, OLED will show "OVER TIME".
2.Low-voltage protection: when the voltage is below 3.2 V, OLED will show "low battery" and flash 5 times,the products need to be charged in time, since low battery cannot support smoking normally.
3.Reverse connection protection: when battery is put at wrong direction, it will not cause any damage to control panel with protection. Take out the battery and put it in the right direction, the product will work normally.

4.Short-circuit protection: when the resistance of the atomzier is below 0.2 ohm, in order to avoid over-heating, the circuit will have a protection automatically, the screen will show "SHORTED".  

5.In the high-power working condition: when the voltage of the battery get too low, and cannot support the high output power, the battery's symbol on the screen will keep "flashing". The system will adjust the output power automatically to ensure the battery can be in normal use when the voltage is over 3.3V.

Previous:Promotion for pre-order X4 160w TC Box Mod

Next:Topgreen 60w mini tc mod very same size as Cloupor Mini 30W