1.Remove magnet cap
2.Pack moderate ground herb into the chamber
(For concentrate, please put the metal pad into insert ceramic chamber and then load wax.)
3.Replace the magnet cap
4.Hold and press the power button for 3 seconds to turn on the XMAX STARRY3.0 and it will begin to heat up at once under the default settings. The " ” will keep blinking during the heat-up stage, the “ ”will become solid and device vibration indicates readiness. Inhale through the mouthpiece and enjoy.
Press the “+” to increase temperature, press the ”-” to decrease temperature.(XMAX STARRY3.0 will automatically remember your last setting when restart.)
" will become solid and device vibration indicates readiness. Inhale through the mouthpiece and enjoy till the OLED screen off, the vibration indicates off.
6.Temperature switchover between Fahrenheit and Celsius. Hold the Power button and “-” button at the same time for 2 seconds.
7.Timer switchover between 5 minutes and 10 minutes. Hold the Power button and “+” button at the same time for 2 seconds.
A.To protect and extend the battery, It is recommended your XMAX STARRY3.0 be charged with wall adapter for at least 6 hours before its first use. (External 18650 battery charger is available but not included.)
B.When Charging, the OLED screen will light on. The battery icon will change to show battery charging condition. The icon gauge will be full when battery fully charged.
C.After using the XMAX STARRY3.0 and power adapter, allow them to cool down before storage. Store the STARRY3.0 in a dry and cool place to protect against the effects of weather and out of reach of children or unqualified persons.
To maintain the XMAX STARRY3.0,it is recommended to clean the chamber and the mouthpiece after every use.
A.Clean the mouthpiece, use a cotton swab and wipe the inner part of the mouthpiece then wipe again witha damp paper towel.
B.Clean the filter. Prepare aglass container filled with isopropyl alcohol. Remove the filter from magnet cap, and place it in the isopropyl alcohol.
C.Clean the Ceramic heating chamber, wet a cotton swab in the alcohol. Insert into the chamber and scrub the sides and bottom with a circular motion.
D.After soaking, remove any remaining debris using a cotton swab.Allowboth pieces to dry completely before use.
DO NOT CLEAN THE WHOLE DEVICE WITH WATER OR SUBMERGE.
DO NOT INJECT ANY LIQUID OR OIL INTO THE CERAMIC CHAMBER.
MAKE SURE DEACTIVATE THE XMAX STARRY3.0 BYLOCKING.MAKE SURE ITHAS NOT BEEN USED FOR AT LEAST 30 MINUTES AND IS COMPLETELY COOLED OFF.
DO NOT TOUCH THE HEATING ELEMENT IMMEDIATELYAFTERUSE,PLEASEALLOW DEVICE TO COOL DOWN.
DO NOT SUBMERGE OR CLEAN WITH WATER OR ISOPROPYL ALCOHOL.
NAME: XMAX STARRY 3.0 (V3) VAPORIZER
OFFICIAL WEBSITE: www.topgreen-tech.com